'); ?> '); ?> '); ?> '); ?>

ROLLER SKATES FOR ADULTS IN COMPARISON

THE BEST ROLLERBOOTS 2022

* Advertising / As an affiliate partner we earn on qualified purchases / Details in §5.2 of the privacy policy.

MORE ROLLER BOOTS TO CHECK

THE BEST Rollerskates

Osprey Retro Quad Roller Skates for Adults

Check price on Amazon*

Kingdom GB Candy Quad Wheels Roller Skates Rollerboots

Check price on Amazon*

Rio Roller Milkshake Skates

Check price on Amazon*

Roces RC1 Classic Roller Skates Artistic, Quad 4 Wheels Skating

Check price on Amazon*

Roces Kolossal Roller Skates, Quad Roller Skates

Check price on Amazon*

KALINU Unisex Roller Skates Four Wheels High-top Roller Skates

Check price on Amazon*

* Advertising / As an affiliate partner we earn on qualified purchases / Details in §5.2 of the privacy policy.

ROLLER Skates FOR ADULTS – OLDIES BUT GOLDIES

The roller boots belong to the roller sports category and have a similar construction as the inline skates. They are divided into five parts: Shoes, axles, wheels, ball bearings, stoppers. But this was not the case from the beginning. In fact, roller boots had a very difficult start.In 1760, Joseph Merlin, a violinist, cobbled “roller skates” together. His idea was to entertain the audience at the masked ball in Carlisle House with something new. To give more attention to the floating effect, he had a huge mirror put up. The show began.

So he pushed off and drove into the hall playing the violin. What he didn’t include in his choreography was the braking and steering. This was also the case with his “roller skates”. Whoever brakes, loses, or something like that, you might think. Unfortunately the opposite was the case. Because he could not steer, let alone brake, he simply raced into the huge mirror. The consequences were severe injuries. It must have been so dramatic that it took almost 90 years before the subject of roller boots was treated again. After all, the hype they deserved was created in the 80s.



NOTE THE FOLLOWING THINGS BEFORE YOU BUY:

There are two ways in which roller skates for adults can be constructed.

1. shoes+axles+rolls in one piece

2. Buy shoes and mount the axles/rollers on them.

But which is better?

IN ONE PIECE:

PRO

✅ cheaper

✅ shoes are harder (similar to ice skates)

➤ prevents the ankle from buckling

✅ buy ➤ unpack and drive

CON

⛔ inferior quality

⛔ Shoes partly uncomfortable


PUT IT TOGETHER:

PRO

✅ individual ➤ own favourite shoes are used

✅ coordinated components

✅ enhanced quality

CON

⛔ more expensive

⛔ the necessary minimum level of know-how to purchase and assemble individual parts


roller skates adults

In the end, it is up to each individual to decide which variant to choose. The pre- and non-skates relative each other. In principle, one can advise beginners/newcomers to a finished product, because a sport must first be touched before a passion for it develops.

Whether in one piece or assembled is irrelevant when it comes to the individual components. Buy adult rollerboots just like that? That only works in the short term, because such a purchase can turn out to be a flop pretty quickly, and that’s it with passion. So here are a few important facts to help you avoid a bad buy.



THE SHOE

roller skates

Of course the normal “rules” also apply here. He should:

… if possible be adapted to the shape of the foot

… have a good footbed

Do not press anywhere

… be visually appealing to yourself

In addition, you can choose between a hard shell shoe and a softer version, the “softboot” (sneaker). Both should cover the ankle joints. However, they should not be too rigid, otherwise it will be more difficult to ride in a squatting position. Softboots have the great advantage of being more agile. On the other hand, the risk of your ankles buckling increases. In the meantime, semi-soft shoes have established themselves in the scene and rightly so. They offer many advantages, for example: They are:

  • more agile
  • more stable
  • tearproof (too soft = the shoes tear faster)
  • protect the ankle

In addition, the shoes should be half a centimeter larger than the actual shoe size.



THE AXES

axes

With the axes you have to ask yourself if you want to perform tricks. Basically you can buy roller skates for adults, which have robust axles. There is nothing wrong with that at first. Some small information about the construction: The axles are not separated like a longboard/penny board, but are connected by a so-called plate. The consists of aluminium and a layer of rubber or nylon. For an optimal riding experience you can adjust the steering rubber according to your wishes. The softer they are, the more agile you are. The harder they are, the more stable you are.

Make sure that both steering rubbers are equally soft/hard, otherwise your shoe steers unintentionally in one direction

THE ROLES

axes

As with any other rolling sport, hardness is the crux of the matter. Before doing so, you should be aware that there are two different materials.

1. PU rollers (= polyurethane) ➤ special plastic mixture

2. Rubber rollers

Both have their advantages. However, there are no serious disadvantages. In short: Most castors are made of polyurethane and that is a good thing. They are more stable, non-slip and last longer. Back to the degree of hardness. This indicates how soft the rolls are. A scale from 0A-100A, where 0A is very soft and 100A very hard, indicates the degree of hardness. The harder the rollers are, the faster you are. Sounds good so far, if there wasn’t a catch to it. Wheels that are too hard minimize the suspension between you and the road.

The optimal degree of hardness does not exist, but in the skater-scene a degree of hardness between 75A-85A is recommended.



THE BALL BEARING

ball bearing

Often you see something like this on shop pages: Ball bearings ABEC 5 ( 3,7,11,13…). By mistakeball bearing

many believe that a higher number means increasing quality. But it’s not so. If you buy roller skates for adults, you should ask the seller which manufacturer the ball bearings come from (if it is not stated), because that is the decisive factor. Unfortunately, roller bearings of inferior quality are usually used in roller skates, which is counterproductive, but not a broken leg. Ball bearings usually don’t cost much money (about 20$) and can be exchanged without any problems.



THE STOPPER

stopper

The stopper, as the name suggests, is used to brake. But this is not roller skates adult stopperhis only function. Much more its primary function is to facilitate starting. Most of the stoppers are made of strong polyurethane, just like the wheels. Unfortunately, this is not really a suitable material because this plastic wears out faster. A much better material would be hard rubber. Fortunately, stoppers are usually replaceable. So if you go to buy roller skates for adults, you can always reorder hard rubber stoppers afterwards or buy them when the stoppers are worn out.



HOW MUCH DO ROLLER SKATES COST?

As is often the case, it is unfortunately not possible to give a specific sum. One could calculate the average, but I don’t think that would help anyone here. If you ask such a question, then you probably want to know how much do I have to spend at least to get reasonable roller boots for adults, right? 20$ ehm I meant 30$ of course or 40$? All jokes aside… To find reasonable roller skates, you have to take a closer look at the individual components (see above) and then you can calculate everything. For those who are in a hurry ,but first a quick answer. At least 40$ should be in it, in order not to make a bad buy.

In addition, one can rely on the reviews of others. We have, for example, checked technical data and asked customers to gradually add products to our TOP roller skates. If you want to have really good roller skates (only recommended if you are sure that you really stick to the sport) you should stick to bigger brands, because this is different with this kind of product than with Apple for example (pay a lot only for the brand).

Why it costs so much, you ask yourself? Then I’ll give you the bill that a manufacturer spends on his parts:

- Shoes (2 pairs) ~7$

- Axles (2 pair) ~10$

- Roller+ball bearing (8 pieces) ~5$

= 10$+13$+5$ = 22$ + 19% taxes= 26$ + Amazon fees (10% minimum) = 28$ + 12$ profit for the producer

So you see, cheaper than 40$ is almost impossible if you expect GOOD quality!



CONCLUSION: ROLLER SKATES ADULTS

When you are ready and your roller skates for adults are finally there, the fun can begin. To make the beginning a little easier, here is a tutorial that shows you exactly how to skate correctly.